Nano Complete

Nano Complete

$5.92

Free Shipping for Orders over $25

$10 Flat Fee Shipping for Orders Under $25

DOWNLOAD SDS

An Aqueous NANO Reef Buffer System & an Ionically Balanced Combination of Necessary Trace Elements in One Simple System!

Automatically Sets pH to 8.2 – 8.3

MICROBE-LIFT/Nano Complete is ionically balanced with trace elements for Nano Reef systems and it will create a buffered system as well. A pH of 8.0 to 8.3 and an alkalinity of 2.9 to 4.0 meq/L. (8 to 11 dKH) is necessary for salt water and reef aquariums (fish only marine aquariums need to maintain 3.5 to 5.5 meq/L. or 10 to 14 dKH) and calcium levels should be at 400 to 450 ppm. Test calcium and alkalinity levels and adjust to your individual system. Do not add more than 0.5 mL per gallon per 12 hour period. Add calcium and this product for optimal results. If magnesium is low use MICROBE-LIFT/Magnesium Supplement. Regular water changes are recommended. You should use the MICROBE-LIFT line of reef products to simultaneously replace any minerals that are low.

NANO-Reef tanks (under 20 gals.) and PICO-Reef tanks (under 5 gals) are very popular due to their lower initial cost set up. However, the smaller the tank, the more rapidly water conditions may deteriorate. Smaller tanks are less forgiving than tanks holding larger volumes of water.

Optimum water conditions are a necessity for good mini-reef systems. Where possible start with R/O water. If tap water is used be sure to condition the water with MICROBE-LIFT/XTreme or MICROBE-LIFT/Dechlorinator +. Routine water changes are a necessity in reef tanks. Calcium and Alkalinity are an important part of the reef system.

Available Sizes

  • 2 fl. oz. (59 mL.) (COMN02) Treats up to 236 gal. (893 L.)

Cautions

  • Keep out of the reach of children
  • Store in a cool, dry area out of direct sunlight
  • Follow directions carefully

This product is intended for use with all ornamental and aquarium fish but may not be used with fish intended for human consumption.

Clear
SKU: N/A Category:

Description

Directions

  • Always shake well before using.
  • Add 1/2 cap (2.5 mL) per 10 gallons (38 L.) each day in the highest flow area in the tank until target alkalinity is reached.
  • Never mix with calcium or magnesium solution, add separately to tank.
  • Some cloudiness may appear, this will go away rapidly.

Additional information

Size

2oz (COMN02)